Pivot 10 IGR Concentrate

When using Pivot 10 for indoor flea control in kennels and doghouses, what must be done regarding animals?

• Keep animals in the area but away from treated surfaces
• Remove animals before spraying ✓
• Only remove animals if using an adulticide
• Apply only after animals have been fed

Answer: The label specifically instructs to 'Remove animals before spraying' for kennel and doghouse applications.

🔗 Source

According to the label, when can children or pets contact surfaces treated for fleas indoors?

• Immediately after application
• After 24 hours
• When the spray has thoroughly dried ✓
• After vacuuming the area

Answer: The label states: 'Do not allow children or pets to contact treated surfaces until spray has thoroughly dried.'

🔗 Source

How long will Pivot 10 provide IGR activity when applied to soil surfaces?

• 6 months
• 12 months
• 30-60 days ✓
• Indefinitely

Answer: The label states that application on soil surfaces will provide 30-60 days of IGR activity, depending on insect type, soil type, and weather.

🔗 Source

When applying Pivot 10 to indoor cockroaches and crickets via General Surface Application, how long does one treatment work against nymphs and crickets?

• 30-60 days
• 3 months
• 6 months ✓
• 12 months

Answer: The label states that one treatment works for 6 months against cockroach nymphs and crickets.

🔗 Source

If a technician is treating carpets for fleas using a liquid, non-heat extracting carpet shampoo, how much Pivot 10 should be used per gallon of diluted shampoo?

• 1 mL
• 4 mL ✓
• 8 mL
• 12 mL

Answer: The label specifies a rate of 4 mL per gallon of diluted shampoo for carpet flea treatments.

🔗 Source

To treat an outdoor flea infestation using power spraying, what is the correct mixing rate?

• 4 mL per 1,000 square feet
• 12 mL per 1,000 square feet
• 18 to 56 mL per 50 gallons of water ✓
• 4 mL per gallon of water

Answer: For outdoor power spraying, the alternate mixing directions are 18 to 56 mL of concentrate per 50 gallons of water.

🔗 Source

When treating an indoor flea infestation via General Surface Application, what is the recommended rate of Pivot 10 per 1,500 square feet?

• 4 mL ✓
• 12 mL
• 1 mL
• 18 mL

Answer: For established indoor flea infestations using General Surface Application, the label specifies a rate of 4 mL per 1,500 square feet.

🔗 Source

What is the required dilution for a Pivot 10 Space Spray, Void Injection ULV, or Fog Application for fleas or cockroaches/crickets?

• 1 mL per 1,000 cu. ft. of space ✓
• 4 mL per 1,500 sq. ft.
• 12 mL per 1,000 sq. ft.
• 1 mL per gallon of water

Answer: For space spray, void injection, and fog applications, the rate is 1 mL of concentrate per 1,000 cu. ft. of space.

🔗 Source